Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 6, Article number: 24800 (2016)
2288
19
Metrics details
Improving dewaterability of sludge is important for the disposal of sludge in wastewater treatment plants (WWTPs). This study, for the first time, investigated the Fe(II) activated oxidization processes in improving anaerobically digested sludge (ADS) dewaterability. The combination of Fe(II) (0–100 mg/g total solids (TS)) and persulfate (0–1,000 mg/g TS) under neutral pH as well as the combination of Fe(II) (0–100 mg/g TS) and hydrogen peroxide (HP) (0–1,000 mg/g TS) under pH 3.0 were used to examine and compare their effect on the ADS dewaterability enhancement. The highest ADS dewaterability enhancement was attained at 25 mg Fe(II)/g TS and 50 mg HP/g TS, when the CST (CST: the capillary suction time, a sludge dewaterability indicator) was reduced by 95%. In contrast, the highest CST reduction in Fe(II)-persulfate conditioning was 90%, which was obtained at 50 mg Fe(II)/g TS and 250 mg persulfate/g TS. The results showed that Fe(II)-HP conditioning was comparable with Fe(II)-persulfate conditioning in terms of highest CST reduction. Economic analysis suggested that the Fe(II)-HP conditioning was more promising for improving ADS dewaterability compared with Fe(II)-persulfate conditioning, with the saving being up to $65,000 per year in a WWTP with a population equivalent of 100,000.
It is well-known that activated sludge processes are the most commonly used method of wastewater treatment. Despite its high efficiency in removing organic substances, huge amounts of waste activated sludge (WAS) are also produced, which causes serious environmental problems and must be treated and disposed of. However, the cost associated with the WAS treatment and disposal was expensive, which could occupy 30–55% of the total operating costs for a wastewater treatment plant (WWTP)1,2,3,4,5.
The sludge treatment and disposal procedure usually consists of thickening, stabilization, conditioning and dewatering1. Sludge conditioning aimed to improve sludge dewaterability, thus facilitating the removal of water during the subsequent dewatering process. The water contained in sludge could be classified as free water and bound water. The bound water is coupled with sludge by means of capillary forces or chemical bounds, which is difficult to separate. On the contrary, the free water is loosely coupled with sludge structure and therefore is capable of being removed easily during the dewatering process. After the conditioning process, the bound water could be transformed into free water6,7,8,9,10.
Nowadays, a number of techniques have been developed for WAS conditioning, such as advanced oxidization, acid/alkaline, freezing/thawing, heating, and physical treatment6,7,8,9,10,11,12. Among them, classic Fenton’s reaction (a typical advanced oxidization method) is promising as a result of its effectiveness in improving WAS dewaterability together with its environment-friendly characteristics13,14,15,16. The classic Fenton’s reaction consists of many chain reactions between ferrous (Fe(II)) and hydrogen peroxide (HP) in acidic condition (Eqs (1, 2, 3, 4, 5, 6, 7))17. These reactions generate huge amounts of hydroxyl radicals (HO·), which is a highly reactive oxidizing agent18. The hydroxyl radicals could oxidize sludge structure. These reactions could facilitate the conditioning of sludge and improve the WAS dewaterability19,20.
Recently, Zhen et al.10 reported an innovative method to enhance dewaterability of WAS by Fe(II)-activated persulfate oxidation. They presented that Fe(II)-persulfate oxidation was capable of enhancing WAS dewaterability. In the Fe(II)-persulfate conditioning, through the reduction of persulfate anion (S2O82−) by Fe(II), the sulfate radical (˙SO4−) is capable of being produced (Eq. 8)21, which has a high oxidation potential10.
In many WWTPs, anaerobic digestion process is widely utilized to reduce WAS and generate methane before dewatering1,22,23,24. In this process, anaerobically digested sludge (ADS) are substantially produced. Different from the average WAS, the ADS is more difficult to dewater, and the current conditioning methods are unsatisfactory25. Therefore, high-efficiency conditioning methods for ADS are also needed.
In this study, we investigated and compared the role of HP and persulfate in enhancing dewaterability of ADS through Fe(II) activated oxidation processes for the first time. Capillary suction time (CST) was used as the indicator of ADS dewaterability, which represents the time used for completing the sludge filtration process. Soluble chemical oxygen demand (SCOD) and total iron concentrations in ADS were also measured. Moreover, economic analysis was performed to compare the economic potentials of the Fe(II)-HP and Fe(II)-persulfate conditioning methods.
The effect of Fe(II) concentrations on the ADS dewaterability could been seen in Fig. 1. The ADS dewaterability was enhanced significantly when Fe(II)-persulfate or Fe(II)-HP were added. For the Fe(II)-persulfate conditioning, the reduction percentage of CST rose from 55% to 90% (p < 0.05) while the Fe(II) concentration increased from 0 to 50 mg/g TS at a concentration of 250 mg persulfate/g TS under neutral pH (around 7.6). For Fe(II)-HP conditioning, the reduction percentage of CST increased from 75% to 93% (p < 0.05) when the Fe(II) concentration rose from 0 to 25 mg/g TS at a concentration of 250 mg HP/g TS at pH 3.0. During the processes, the increased concentration of Fe(II) led to the production of more hydroxyl radicals (HO·) (Eq. 1) or persulfate radicals (˙SO4−) (Eq. 8), which oxidized sludge flocs to a greater extent. Afterwards, bound water was transformed into free water and thus improved the ADS dewaterbaility26.
Persulfate and HP concentrations were both at 250 mg/g TS. The CST of original ADS without any conditioning was used as the reference.
Nevertheless, the dewaterability of ADS was not further improved (p > 0.05) while the Fe(II) concentration increased from 50 to 100 mg/g TS in Fe(II)-persulfate conditioning and from 25 to 100 mg/g TS in Fe(II)-HP conditioning. This might be because that excess addition of Fe(II) could react with sulfate radicals (Eq. 9) and thus consumed the sulfate radicals in Fe(II)-persulfate conditioning. Similarly, in Fe(II)-HP conditioning, excess Fe(II) could also deplete the hydroxyl radicals (Eq. 4). The results indicated that excess addition of Fe(II) (>50 mg/g TS in Fe(II)-persulfate conditioning and >25 mg/g TS in Fe(II)-HP conditioning) could not lead to the corresponding improvement of ADS dewaterability.
It should be noteworthy that the reduction percentage of CST (approximately 90%) in this study was substantially higher than those (approximately 50%) reported in the previous studies, in which similar oxidants were used to enhance the WAS dewaterability27,28. The reason might be due to the diverse characteristics between WAS and ADS. For instance, they have different shear sensitivity, structural properties, chemical compositions (e.g. concentration of polysaccharide and protein) of intracellular substances and extracellular polymeric substances29,30, and thus different filterability and dewaterability performance31,32,33. This is also why this study was carried out.
In addition, it was found that the increased Fe(II) concentration from 0 to 50 mg/g TS resulted in the decreased SCOD concentrations (from 1,670 to 640 mg/L) in Fe(II)-persulfate conditioning. Likewise, SCOD concentrations decreased from 3,280 to 2,380 mg/L while Fe(II) concentration increased from 0 to 25 mg/g TS in Fe(II)-HP conditioning (see Fig. 2). This might be due to the increased oxidization capacity of the oxidization processes34,35, which was consistent with the CST result. However, further increase of Fe(II) failed to induce an decrease in SCOD, which might be due to the consumption of free radicals, as discussed in the previous sections.
Persulfate and HP concentrations were both at 250 mg/g TS.
Based on Fig. 1, 50 mg Fe(II)/g TS was sufficient in enhancing ADS dewaterability in the Fe(II)-persulfate conditioning. Thus, the effect of persulfate concentration on ADS dewaterability was explored at 50 mg Fe(II)/g TS. Figure 3 showed that the CST reduction percentage rose from 70% to 90% (p < 0.05) when the concentration of persulfate increased from 0 to 250 mg/g TS. However, when the concentration of persulfate further rose from 250 mg/g TS to 1,000 mg/g TS, the ADS dewaterability did not increase any more. The phenomenon was in accordance with the previous study26,36, which reported that adding excessive persulfate could not accelerate the advanced oxidization processes.
Fe(II) concentration in persulfate and HP conditioning sets were 50 and 25 mg/g TS, respectively. The CST of original ADS without any conditioning was used as the reference.
For the Fe(II)-HP conditioning, it was found that 25 mg Fe(II)/g TS was enough in improving ADS dewaterability. Therefore, the impact of HP concentration on ADS dewaterability was investigated at 25 mg Fe(II)/g TS. Figure 3 showed that the reduction percentage of CST increased from 70% to 95% (p < 0.05) when the concentration of HP rose from 0 to 50 mg/g TS. However, when the concentration of HP further increased to 1,000 mg/g TS, the ADS dewaterability declined slightly (p < 0.05). It was due to the fact that the addition of excess HP could consume hydroxyl radicals (Eq. 3), thereby impacting the oxidization processes negatively.
This study demonstrated that both Fe(II)-persulfate conditioning and Fe(II)-HP conditioning were effective in improving ADS dewaterability. In order to compare both methods, the ratios of CST reduction percentages of Fe(II)-HP to Fe(II)-persulfate conditionings were calculated and shown in Fig. 4. Figure 4A was to compare the effect of Fe(II) concentration (0–100 mg/g TS) on ADS dewaterability when both persulfate and HP concentrations were at 250 mg/g TS. Figure 4A showed that the CST reduction percentages of Fe(II)-HP conditioning were higher (1.2–1.4 times) than those of Fe(II)-persulfate conditioning (p < 0.05) while the Fe(II) concentration was less than 50 mg/g TS. However, the CST reduction percentages of Fe(II)-HP conditioning were comparable with those of Fe(II)-persulfate conditioning (p > 0.05) when the Fe(II) concentration was higher than 50 mg/g TS. Meanwhile, it was interesting that when there was no Fe(II) addition in the system, the ratio of CST reduction percentage of Fe(II)-HP to Fe(II)-persulfate conditionings was the highest (i.e. 1.4). This is likely due to the fact that HP could react with the indigenous iron (i.e. iron in sludge) and generated hydroxyl radicals under acidic conditions37. The results implied that HP might be more suitable for sludge conditioning compared with persulfate, especially when the indigenous iron concentration in ADS was high.
(A) Effect of Fe(II) concentration on ADS dewaterability. Persulfate and HP concentrations were both at 250 mg/g TS. (B) Effect of oxidant (i.e. persulfate or HP) concentration on ADS dewaterability. Fe(II) concentrations in persulfate and HP conditioning sets were 50 and 25 mg/g TS, respectively.
Figure 4B was to compare the effect of persulfate or HP concentration (0–1,000 mg/g TS) on ADS dewaterability when the Fe(II) concentration in persulfate and HP conditioning sets were 50 and 25 mg/g TS, respectively. The results showed that the reduction percentages of CST in Fe(II)-HP conditioning were comparable with those of Fe(II)-persulfate conditioning (p > 0.05) in all persulfate and HP concentrations except that when the concentrations of HP or persulfate were at 50 and 100 mg/g TS. The ratio of CST reduction percentage of Fe(II)-HP to Fe(II)-persulfate conditionings attained the maximum value (i.e. 1.2) while the concentration of HP or persulfate was at 50 mg/g TS. It was also noteworthy that the addition of Fe(II) in Fe(II)-HP conditioning (25 mg/g TS) was only half of that (50 mg/g TS) in Fe(II)-persulfate conditioning. Therefore, the Fe(II)-HP conditioning consumed much less chemicals than the Fe(II)-persulfate conditioning.
Furthermore, according to the results attained in batch tests, the highest improvement of ADS dewaterability in the Fe(II)-HP conditioning was obtained at 25 mg Fe(II)/g TS and 50 mg HP/g TS, under which the CST was decreased by 95% (see Fig. 3). However, the largest enhancement of ADS dewaterability in the Fe(II)-persulfate conditioning was obtained at 50 mg Fe(II)/g TS and 250 mg persulfate/g TS, under which the CST was decreased by 90% (see Fig. 3). Regarding the highest CST reduction, Fe(II)-HP conditioning was comparable with Fe(II)-persulfate conditioning. However, in terms of treatment efficiency and economical potential (see the following section for economic analysis), Fe(II)-HP conditioning was more promising for the improvement of ADS dewaterability compared with Fe(II)-persulfate conditioning.
In this work, the effects of Fe(II)-persulfate and Fe(II)-HP conditionings on the ADS dewaterability were investigated and compared by laboratory tests for the first time.
In order to compare the economic potential of the Fe(II)-HP conditioning with the Fe(II)-persulfate conditioning process, a desktop scaling-up study was carried out in a WWTP with a population equivalent of 100,000. The results revealed that the Fe(II)-HP conditioning process was capable of saving the cost by up to 60% ($65,000 per year) compared to the Fe(II)-persulfate conditioning process (see Table 1). However, full-scale tests are still needed to better evaluate the economic potentials of the Fe(II)-HP and Fe(II)-persulfate conditioning methods
Based on the results, we propose a potential approach for enhancing ADS dewaterability in a WWTP, as shown in Fig. 5. The waste activated sludge (WAS) produced in the wastewater treatment process is firstly fed to the anaerobic digester, in which ADS is generated. ADS is then fed to a small conditioning reactor (i.e. Fe(II)-HP conditioning), in which the ADS dewaterability could be enhanced. Afterwards, the treated ADS is transferred to the dewatering process. Finally, smaller volume of sludge would be produced and disposed of.
Conceptual diagram of the proposed conditioning approach applied in a typical wastewater treatment plant.
In conclusion, a series of batch tests were performed to compare the effects of persulfate and HP on the ADS dewaterability through Fe(II) activated oxidation processes. Compared to the Fe(II)-persulfate conditioning, the Fe(II)-HP conditioning was more effective in enhancing the dewaterability of ADS, with the reduction percentage of capillary suction time being up to 95%. Economic analysis indicated that the Fe(II)-HP conditioning was more economically favorable, the total costs could be saved by 60% ($65,000 per year) in comparison to the Fe(II)-persulfate conditioning process.
The ADS was collected from an anaerobic digester (sludge retention time is 15 days) of a local full-scale WWTP for biological nutrient removal. Its main characteristics are shown in Table 2.
The stock concentration of HP (Ajax Finechem Co.) was 30%. Potassium persulfate (Sigma-Aldrich Co.) and ferrous sulfate (analytical grade, Sigma-Aldrich Co.) were used in this study. 30% sulfuric acid was applied to adjust the pH of ADS.
Four groups of batch tests were conducted to compare the effects of Fe(II)-persulfate and Fe(II)-HP conditioning processes on ADS dewaterability (Table 3). In the Fe(II)-persulfate conditioning tests, two groups of batch tests were designed (Table 3, Sets A). The group I was to investigate the effect of Fe(II) concentration (0–100 mg/g TS, see Table 3) while the concentration of persulfate was kept at 250 mg/g TS. The group II was to investigate the effect of persulfate concentration (0–1,000 mg/g TS, see Table 3) while the concentration of Fe(II) was kept as 50 mg/g TS. Similarly, in the Fe(II)-HP conditioning tests, two groups of batch tests were also designed (Table 3, Sets B). The group III was to investigate the effect of Fe(II) concentration (0–100 mg/g TS, see Table 3) while the concentration of HP was kept at 250 mg/g TS. The group IV was to elucidate the effect of HP concentration (0–1,000 mg/g TS, see Table 3) while the concentration of Fe(II) was kept at 25 mg/g TS. All the tests were done in duplicate.
In every test, 50 ml of ADS was added to a 150 mL flask. pH of the ADS was not adjusted in the Fe(II)-persulfate conditioning and was observed at around 7.6, whereas pH of the ADS was adjusted to 3.0 by adding sulfuric acid (30%) in the Fe(II)-HP conditioning. Different concentrations of persulfate/HP and Fe(II) were then added to the flasks according to Table 3. Afterwards, the flasks were placed on an orbital shaker for 0.5 h at 150 rpm. The CST and SCOD were then measured according to the approaches detailed in the next Section.
The dewaterability of ADS was measured by a capillary suction timer (Trition-WPRL, Type 304). CST is normally used to indicate the dewaterability of sludge38, which could measure the time required for sludge to finish the filtration process. The sludge was added to the stainless-steel funnel above the filter paper in the filtration process. After that, the equipment determined the required time of the water in sludge permeated the filter paper.
Iron concentration in the original ADS was determined via Inductive Coupled Plasma connects with Optical Emission Spectroscopy instrument (ICP-OES). The ADS samples were first digested with 70% nitric acid (HNO3) for 15 min before performing the measurement. TS, VS, TCOD (Total Chemical Oxygen Demand) and SCOD concentrations were determined based on the standard methods39.
The enhancement of ADS dewaterability was assessed via the CST reduction percentage R (%), which is calculated as follows:
where CST0 represents the CST of the original ADS (s); CSTa represents the CST of the ADS after conditioning (s).
How to cite this article: Song, K. et al. Role of oxidants in enhancing dewaterability of anaerobically digested sludge through Fe(II) activated oxidation processes: hydrogen peroxide versus persulfate. Sci. Rep. 6, 24800; doi: 10.1038/srep24800 (2016).
Foladori, P., Andreottola, G. & Ziglio, G. Sludge reduction technologies in wastewater treatment plants. (IWA publishing, 2010).
Wang, Q., Ye, L., Jiang, G., Jensen, P., Batstone, D. & Yuan, Z. Free nitrous acid (FNA)-based pre-treatment enhances methane production from waste activated sludge. Environ. Sci. Technol. 47, 11897–11904 (2013).
Article ADS CAS Google Scholar
Wang, Q., Jiang, G., Ye, L. & Yuan, Z. Enhancing methane production from waste activated sludge using combined free nitrous acid and heat pre-treatment. Water Res. 63, 71–80 (2014).
Article CAS Google Scholar
Wang, Q., Hao, X. & Yuan, Z. Towards energy positive wastewater treatment by sludge treatment using free nitrous acid. Chemosphere 144, 1869–1873 (2016).
Article ADS CAS Google Scholar
Hao, X., Wang, Q., Cao, Y. & van Loosdrecht, M. C. M. Measuring the activities of higher organisms in activated sludge by means of mechanical shearing pretreatment and oxygen uptake rate. Water Res. 44, 3993–4001 (2010).
Article CAS Google Scholar
Kuutti, L. et al. Properties and flocculation efficiency of cationized biopolymers and their applicability in papermaking and in conditioning of pulp and paper sludge. BioResources 6, 2836–2850 (2011).
CAS Google Scholar
Li, H., Jin, Y. & Nie, Y. Application of alkaline treatment for sludge decrement and humic acid recovery. Bioresour. Technol. 100, 6278–6283 (2009).
Article CAS Google Scholar
Montusiewicz, A., Lebiocka, M., Rozej, A., Zacharska, E. & Pawlowski, L. Freezing/thawing effects on anaerobic digestion of mixed sewage sludge. Bioresour. Technol. 101, 3466–3473 (2010).
Article CAS Google Scholar
Wang, W., Luo, Y. & Qiao, W. Possible solutions for sludge dewatering in China. Front. Environ. Sci. En. 4, 102–107 (2010).
Article Google Scholar
Zhen, G. et al. Novel insights into enhanced dewaterability of waste activated sludge by Fe (II)-activated persulfate oxidation. Bioresour. Technol. 119, 7–14 (2012).
Article CAS Google Scholar
Feng, X. et al. Dewaterability of waste activated sludge with ultrasound conditioning. Bioresour. Technol. 100, 1074–1081 (2009).
Article CAS Google Scholar
Yuan, H., Zhu, N. & Song, F. Dewaterability characteristics of sludge conditioned with surfactants pretreatment by electrolysis. Bioresour. Technol. 102, 2308–2315 (2011).
Article CAS Google Scholar
Dewil, R., Baeyens, J. & Neyens, E. Fenton peroxidation improves the drying performance of waste activated sludge. J. Hazard. Mater. 117, 161–170 (2005).
Article CAS Google Scholar
Erden, G. & Filibeli, A. Improving anaerobic biodegradability of biological sludges by Fenton pre-treatment: Effects on single stage and two-stage anaerobic digestion. Desalination 251, 58–63 (2010).
Article CAS Google Scholar
Lu, M. C., Lin, C. J., Liao, C. H., Huang, R. Y. & Ting, W. P. Dewatering of activated sludge by Fenton’s reagent. Adv. Environ. Res. 7, 667–670 (2003).
Article CAS Google Scholar
Zhen, G. Y. et al. Enhanced dewatering characteristics of waste activated sludge with Fenton pretreatment: effectiveness and statistical optimization. Front. Env. Sci. Eng. 8, 267–276 (2014).
Article CAS Google Scholar
Pignatello, J. J., Oliveros, E. & MacKay, A. Advanced oxidation processes for organic contaminant destruction based on the Fenton reaction and related chemistry. Crit. Rev. Env. Sci. Tec. 36, 1–84 (2006).
Article CAS Google Scholar
Bossmann, S. H. et al. New evidence against hydroxyl radicals as reactive intermediates in the thermal and photochemically enhanced Fenton reactions. J. Phys. Chem. A 102, 5542–5550 (1998).
Article CAS Google Scholar
Neyens, E., Baeyens, J. & Dewil, R. Advanced sludge treatment affects extracellular polymeric substances to improve activated sludge dewatering. J. Hazard. Mater. 106, 83–92 (2004).
Article CAS Google Scholar
Pham, T., Brar, S., Tyagi, R. & Surampalli, R. Influence of ultrasonication and Fenton oxidation pre-treatment on rheological characteristics of wastewater sludge. Ultrason. Sonochem. 17, 38–45 (2010).
Article CAS Google Scholar
Liang, C., Bruell, C. J., Marley, M. C. & Sperry, K. L. Persulfate oxidation for in situ remediation of TCE. I. Activated by ferrous ion with and without a persulfate–thiosulfate redox couple. Chemosphere 55, 1213–1223 (2004).
Article ADS CAS Google Scholar
Appels, L. et al. Anaerobic digestion in global bio-energy production: potential and research challenges. Renew. Sust. Energ. Rev. 15, 4295–4301 (2011).
Article CAS Google Scholar
Molino, A., Nanna, F., Ding, Y., Bikson, B. & Braccio, G. Biomethane production by anaerobic digestion of organic waste. Fuel 103, 1003–1009 (2013).
Article CAS Google Scholar
Weiland, P. Biogas production: current state and perspectives. Appl. Microbiol. Biot. 85, 849–860 (2010).
Article CAS Google Scholar
Houghton, J. I., Quarmby, J. & Stephenson, T. The impact of digestion on sludge dewaterability. Process Saf. Environ. 78, 153–159 (2000).
Article CAS Google Scholar
Zhen, G., Lu, X., Zhao, Y., Chai, X. & Niu, D. Enhanced dewaterability of sewage sludge in the presence of Fe (II)-activated persulfate oxidation. Bioresour. Technol. 116, 259–265 (2012).
Article CAS Google Scholar
Buyukkamaci, N. Biological sludge conditioning by Fenton’s reagent. Process Biochem. 39, 1503–1506 (2004).
Article CAS Google Scholar
Tony, M. A., Zhao, Y. & Tayeb, A. M. Exploitation of Fenton and Fenton-like reagents as alternative conditioners for alum sludge conditioning. J. Environ. Sci. 21, 101–105 (2009).
Article CAS Google Scholar
Zhang, W. J., Yang, P., Yang, X. Y., Chen, Z. & Wang, D. S. Insights into the respective role of acidification and oxidation for enhancing anaerobic digested sludge dewatering performance with Fenton process. Bioresour. Technol. 181, 247–253 (2015).
Article CAS Google Scholar
Mikkelsen, L. H. & Keiding, K. Physico-chemical characteristics of full scale sewage sludges with implications to dewatering. Water Res. 36, 2451–2462 (2002).
Article CAS Google Scholar
Sheng, G.-P., Yu, H.-Q. & Li, X.-Y. Extracellular polymeric substances (EPS) of microbial aggregates in biological wastewater treatment systems: a review. Biotechnol. Adv. 28, 882–894 (2010).
Article CAS Google Scholar
Yu, G.-H., He, P.-J. & Shao, L.-M. Novel insights into sludge dewaterability by fluorescence excitation–emission matrix combined with parallel factor analysis. Water Res. 44, 797–806 (2010).
Article CAS Google Scholar
Tomei, M. C., Rita, S. & Mininni, G. Performance of sequential anaerobic/aerobic digestion applied to municipal sewage sludge. J. Environ. Manage. 92, 1867–1873 (2011).
Article CAS Google Scholar
Martins, R. C., Lopes, D. V., Quina, M. J. & Quinta-Ferreira, R. M. Treatment improvement of urban landfill leachates by Fenton-like process using ZVI. Chem. Eng. J. 192, 219–225 (2012).
Article CAS Google Scholar
Kallel, M. et al. Olive mill wastewater degradation by Fenton oxidation with zero-valent iron and hydrogen peroxide. J. Hazard. Mater. 163, 550–554 (2009).
Article ADS CAS Google Scholar
Zhen, G.-Y., Lu, X.-Q., Li, Y.-Y. & Zhao, Y.-C. Innovative combination of electrolysis and Fe (II)-activated persulfate oxidation for improving the dewaterability of waste activated sludge. Bioresour. Technol. 136, 654–663 (2013).
Article CAS Google Scholar
Zhou, X., Jiang, G., Wang, Q. & Yuan, Z. Role of indigenous iron in improving sludge dewaterability through peroxidation. Sci. Rep-Uk 5 (2015).
Chen, G., Lin, W. & Lee, D. Capillary suction time (CST) as a measure of sludge dewaterability. Water Sci. Technol. 34, 443–448 (1996).
Article CAS Google Scholar
Eaton, A. D. & Franson, M. A. H. Standard methods for the examination of water and wastewater. (American Public Health Association 2005).
Download references
This study was supported by The University of Queensland Early Career Research Grant (ECR040) and the Philanthropic Grant for Early Career Engineering Researcher (GE12015) awarded to Dr. Qilin Wang. Dr. Qilin Wang acknowledges the support of Australian Research Council Discovery Early Career Researcher Award (DE160100667). Dr. Kang Song acknowledges postdoctoral fellowship support from the Japan Society for the Promotion of Science (JSPS) (No. 268245). The authors thank Dr. Maxime Rattier from The University of Queensland for the sludge collection.
Kang Song and Xu Zhou: These authors contributed equally to this work.
Advanced Water Management Centre, The University of Queensland, St Lucia, Queensland, 4072, Australia
Kang Song, Dongbo Wang & Qilin Wang
Institute of Engineering, Tokyo University of Agriculture and Technology, Tokyo, 184-8588, Japan
Kang Song & Beibei Zhou
Harbin Institute of Technology Shenzhen Graduate School, Shenzhen, 518055, China
Xu Zhou
School of Automation Science & Engineering, South China University of Technology, Guangdong, 510640, China
Yiqi Liu
Key Laboratory of Pollution Processes and Environmental Criteria (Ministry of Education), Tianjin Engineering Center of Environmental Diagnosis and Contamination Remediation, College of Environmental Science and Engineering, Nankai University, Tianjin, 300071, China
Yanyan Gong
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
All authors contributed intellectually via scientific discussions during the work and have read and approved the final manuscript. K.S., X.Z. and Q.W. developed the methodology, performed data analysis, prepared all figures and drafted the manuscript. Y.L., Y.G., B.Z. and D.W. contributed to the methodology development, assisted with the analysis and discussed the results. Q.W. critically reviewed the manuscript.
Correspondence to Qilin Wang.
The authors declare no competing financial interests.
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
Reprints and Permissions
Song, K., Zhou, X., Liu, Y. et al. Role of oxidants in enhancing dewaterability of anaerobically digested sludge through Fe (II) activated oxidation processes: hydrogen peroxide versus persulfate. Sci Rep 6, 24800 (2016). https://doi.org/10.1038/srep24800
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep24800
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
Korean Journal of Chemical Engineering (2020)
Scientific Reports (2017)
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
© 2023 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.
