Disinfectants are biocidal chemicals used to control food contamination by micro-organisms. Disinfectants are classified as hazardous substances. Although disinfectants used in the food and drink industries are especially selected so that potential residues left on surfaces etc do not taint the food or are harmful to the consumer, many affect the skin, eyes or respiratory system and can be harmful if ingested in sufficient quantity.
The Control of Substances Hazardous to Health Regulations 2002 (COSHH) requires employers to prevent or control exposure to hazardous substances. Where exposure cannot be prevented, employers are required to assess the risk to health, and provide adequate control measures when using hazardous chemicals.
The assessment should include a list of all chemicals to be used, their hazards and measures provided to control operator exposure (covering safe storage, chemical compatibility, working concentrations/safe dilution procedures and application procedures and equipment). Additionally, the assessment should cover any air monitoring or health surveillance requirements, information and training requirements, provision of washing facilities, an emergency action plan (eg for spillage) and waste disposal arrangements. Suppliers of disinfectants have duties for classification and labelling under the Classification, Labelling and Packaging of Substances and Mixtures (CLP) Regulations.
Disinfectant suppliers should provide a material safety data sheet (MSDS) to set out the hazardous properties of each product. This provides information about the health hazards, physical and chemical characteristics, first aid and how to use the chemical safely.
Disinfectants commonly used in the food, drink and catering industries include the following:
Normally disinfectants identified as containing chemicals that are toxic by inhalation or to the skin, or are classified as sensitisers, should be avoided (eg some aldehydes) unless the sanitation programme identifies an absolute requirement. In such cases, strict safety measures to control exposure will be required.
The potential for chemical reaction should be considered when more than a single disinfectant is used. Incompatible chemicals should be stored separately. For example, chlorine-based disinfectants release toxic chlorine gas when in contact with acid or oxidising detergents. Also, hypochlorites form irritant nitrogen halide vapours in contact with amines (eg QACs) and should be stored separately. Disinfectants containing peracetic acid form explosive mixtures with cleaners containing acids or alkalis.
Full-strength concentrates are seldom used for disinfection purposes. Working concentrations should not exceed manufacturers’ specifications as overdosing increases the risk to operatives, in addition to being wasteful, and may damage plant and equipment.
Where costs allow, purchasing disinfectants in their dilute form or in pre-pack quantities for direct dilution are the safer options. Where these are not available or incur prohibitive costs, diluting concentrates by auto-metering, or positive displacement using drum pumps, are considered safer than gravity feed from taps. The latter may jam or be displaced, resulting in uncontrolled leakage into the workroom.
Diluting concentrates by manually tipping drums or carboys is extremely poor practice; it will inevitably cause a spill risk and should not be carried out.
These systems are the safer option for internal disinfection of plant and equipment. This minimises exposure to operatives so long as the plant is maintained and safe systems of work are used.
This generates aerosol likely to produce whole-body exposure to the disinfectants. A greater risk is presented by pressure mist spraying where higher levels of aerosol will be generated. Suitable personal protective equipment (PPE) and respiratory protective equipment (RPE) should be provided. Suitable RPE will range in type from disposable masks, used to protect against liquid aerosols (particle filters marked SL), to airline breathing apparatus, depending on the toxic nature of the disinfectant and personal and work-related factors. PPE may include chemical suit or wetproof apron/overalls, boots, gloves/gauntlets and a visor for eye protection. For example, spraying aldehyde or peracetic acid formulations is likely to require the provision of airline breathing apparatus with full face mask or visor, in addition to full chemical protective clothing, boots and gloves or gauntlets.
This employs similar disinfectants and concentrations to those used in mist and foam applications. However, fogging presents a particular risk to the respiratory system as it produces smaller droplets than spraying. These can remain suspended in air for 45-60 minutes or longer, depending upon the droplet size. This method requires a risk assessment for each type of agent used and strict management procedures to prevent early re-entry of people into fumigated areas, particularly where the more hazardous disinfectants are used (eg aldehydes or peracetic acid). The effectiveness of fogging (and associated health and safety considerations) are fully described in published guidance.
These present a risk of skin and eye exposure (the latter from splashes) which, in many cases, will require the use of an impermeable apron, overalls, gloves/gauntlets and safety spectacles/visor for protection. In addition, where volatile chemicals or respiratory irritants/sensitisers are used (eg alcohols, formaldehyde, glutaraldehyde), there may be a requirement for respiratory protection, particularly when disinfecting in enclosed spaces.
It is important to ensure that garment, glove and boot selection have the ability to resist penetration by the disinfectant concerned. Manufacturers and suppliers have duties to supply this information. However, it should be born in mind that although some types of PPE provide very high levels of protection, breakthrough will eventually occur so none provide 100% protection. Also, skin exposure may occur when removing used PPE. Suitable disposable gloves offer an easy management system to eliminate hand exposure from gloves that become contaminated inside. Advice and information for operators is necessary to ensure that the PPE provides the protection needed.
Disinfectant application equipment should be regularly maintained. Exposure control equipment should be kept in efficient working order and good repair. PPE/RPE should be examined and, where appropriate, tested at suitable intervals. Gloves should be inspected visually every time they are used. Disposable gloves should only be used once if chemicals are handled.
Initially, air sampling may be required to check re-entry is safe into areas where fogging has been undertaken, particularly when high-hazard disinfectants are used, eg aldehydes. Air sampling may be used to identify settling times or the required number of ventilation air changes to reduce airborne concentrations to safe levels prior to re-entry. However, the majority of disinfectants do not have occupational exposure limits. In these cases, reference can be made to published guidance which describes settling times.
Employers are required to carry out health surveillance if exposure of any employee to any disinfectant is such that:
Use of aldehydes as disinfectants will require health surveillance. Health surveillance is also likely to be required where there is a risk of contact dermatitis, which is associated with some disinfectants.
Operators should be informed about the hazards of the disinfectants they work with and the risks created by exposure to these chemicals. They should be instructed in the precautions to take and how to use the control measures provided, and also informed of the results of any air monitoring and health surveillance.
In many cases, skin is the principal organ that may be exposed to disinfectants, so ready access to washing facilities is essential. Employers should ensure that suitable facilities are provided to allow operatives to clean themselves after using disinfectants and before eating and drinking. PPE should be cleaned after use and stored separately from everyday work wear. Where showers or eye-sprays are provided (see following paragraph), they should be frequently flushed through and account taken of a potential risk from legionella bacteria, for which appropriate precautions should be taken.
Emergency procedures should be in place, particularly when handling larger quantities of concentrated disinfectant. Emergency washing facilities (eg showers, eye-wash stations) should be available including measures to irrigate eyes in the event of splashes. The material safety data sheet should be consulted to obtain the appropriate method for handling spillages; this may include, for example, spill trays or absorbent granules. Environmental issues should be considered in the event of a spillage, particularly to prevent spillages running into storm or surface drains.
Is this page useful?
HSE aims to reduce work-related death, injury and ill health.
Information in other languages